Besly
Chucking Reamers

High Speed Steel
Straight Shank

Spiral Flute
Right Hand Cut

Fractional Sizes
 

These Besly Chucking Reamers were designed for use in materials that are ordinarily difficult to ream. The free-cutting design produces smooth accurate holes.

Besly
Chucking Reamers

Straight Shank

Straight Flute
Right Hand Cut

Fractional,
Wire Gauge,
Letter and
Decimal Sizes

This machine reamer has relatively short straight flutes on which the peripheral lands are relieved. It has a slight back taper and a slight chamfer on the end. In use, best results are obtained in a floating holder.

Besly Taper Pin Reamers have a 1/4" per foot taper. They are designed especially for producing pin holes by machine reaming.

High Speed Steel
Straight Shank

Straight Flutes

Number Sizes

Besly Taper Pin Reamers have a 1/4" per foot taper. They are designed especially for producing pin holes by machine reaming.

High Speed Steel
Straight Shank

Spiral Flutes

Number Sizes
 

Besly Taper Pin Reamers have a 1/4" per foot taper. They are designed especially for producing pin holes by machine reaming.

Carbide Tipped
High Speed Steel
Straight Shank

Fractional Sizes
 

Besly chucking expansion reamers can be resized to offset wear. This feature assures the success of these tools on abrasive materials, and is the principle advantage. Resizing is done by expanding, circle grinding to size and clearing as necessary. This procedure may be repeated.