Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute

Machine Screw,
Fractional and
Metric Sizes

Catalog Numbers: 6025A, 6020A, 6034A
 
 

Besly Modern Application Taps for Stainless Steel are for tough to machine Stainless Steel Alloys and Precipitation Hardening (PH) Stainless Steels. Designed for use in through holes, the spiral point propels chips ahead of the tap, reducing the chances of torn or rough threads.

They are surface treated to reduce loading and galling and come with plug (3-5 thread) chamfers.

Choose Catl No. 6025A for machine screw, Catl No. 6020A for fractional and Catl No. 6034A for metric sizes.

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute
DIN Length - ANSI Shanks

Machine Screw,
Fractional and
Metric Sizes

Catalog Numbers: 6025DA, 6020DA, 6034DA
 
 

Besly Modern Application Taps for Stainless Steel are for tough to machine Stainless Steel Alloys and Precipitation Hardening (PH) Stainless Steels. Designed for use in through holes, the spiral point propels chips ahead of the tap, reducing the chances of torn or rough threads.

They are surface treated to reduce loading and galling and come with plug (3-5 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Choose Catl No. 6025DA for machine screw, Catl No. 6020DA for fractional and Catl No. 6034DA for metric sizes.

Catalog Numbers: 6013A, 6044A
 
 

Besly Modern Application Taps for Stainless Steel are for tough to machine Stainless Steel Alloys and Precipitation Hardening (PH) Stainless Steels. Designed for use in blind holes, a spiral flute is used to pull the chips out of the holes, reducing the chance of torn or rough threads.

These taps are surface treated to reduce loading and galling. They are available  with bottom (1-2 thread) or modified-bottom (2-4 thread) chamfers.

Choose Catl No. 6013A for machine screw and fractional sizes and Catl No. 6044A for metric sizes.

Special High Vanadium
Premium Steel (HSSE)

Spiral Flute
2, 3 and 4 Flute
DIN Length - ANSI Shanks

Machine Screw,
Fractional and
Metric Sizes

Catalog Numbers: 6013DA, 6044DA
 
 

Besly Modern Application Taps for Stainless Steel are for tough to machine Stainless Steel Alloys and Precipitation Hardening (PH) Stainless Steels. Designed for use in blind holes, a spiral flute is used to pull the chips out of the holes, reducing the chance of torn or rough threads.

These taps are surface treated to reduce loading and galling. They are available  with bottom (1-2 thread) or modified-bottom (2-4 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Choose Catl No. 6013DA for machine screw and fractional sizes and Catl No. 6044DA for metric sizes.

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute

Machine Screw,
Fractional and
Metric Sizes

Besly Modern Application Taps for Nickel Alloys are for tough to machine Nickel Base Alloys such as Inconel, Hastelloy, Waspalloy, Incoloy, Astraloy, Rene and Monel. Designed for use in through holes, a spiral point is used to drive chips forward, reducing the chance of chip breakage.

These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers.

Choose Catl No. 6325A for machine screw, Catl No. 6320A for fractional sizes and Catl No. 6334A for metric sizes.

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute
DIN Length - ANSI Shanks

Machine Screw,
Fractional and
Metric Sizes

Besly Modern Application Taps for Nickel Alloys are for tough to machine Nickel Base Alloys such as Inconel, Hastelloy, Waspalloy, Incoloy, Astraloy, Rene and Monel. Designed for use in through holes, a spiral point is used to drive chips forward, reducing the chance of chip breakage.

These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Choose Catl No. 6325DA for machine screw, Catl No. 6320DA for fractional sizes and Catl No. 6334DA for metric sizes.

Besly Modern Application Taps for Nickel Alloys are for tough to machine Nickel Base Alloys such as Inconel, Hastelloy, Waspalloy, Incoloy, Astraloy, Rene and Monel. Designed for use in blind holes, a spiral flute is used to pull the chips out, reducing the chance of tap breakage.

These taps are surface treated to reduce friction. They come with bottom (1-2 thread) or modified-bottom (2-4 thread) chamfers.

Choose Catl No. 6313A for machine screw and fractional sizes and Catl No. 6344A for metric sizes.
 

Special High Vanadium
Premium Steel (HSSE)

Spiral Flute
3 and 4 Flute
DIN Length - ANSI Shanks

Machine Screw,
Fractional and
Metric Sizes

Besly Modern Application Taps for Nickel Alloys are for tough to machine Nickel Base Alloys such as Inconel, Hastelloy, Waspalloy, Incoloy, Astraloy, Rene and Monel. Designed for use in blind holes, a spiral flute is used to pull the chips out, reducing the chance of tap breakage.

These taps are surface treated to reduce friction. They come with bottom (1-2 thread) or modified-bottom (2-4 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Choose Catl No. 6313DA for machine screw and fractional sizes and Catl No. 6344DA for metric sizes.

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute

Machine Screw,
Fractional and
Metric Sizes

Besly Modern Application Taps for Titanium Alloys are for commercially pure Titanium and annealed Titanium alloys such as 6AL-4V.  Designed for use in through holes, the spiral point drives the chips forward. Special relief, point diameter, spiral point and chamfer geometry helps reduce heat that commonly causes tap seizure and breakage on reversal.

These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers.

Choose Catl No. 6525A for machine screw, Catl No. 6520A for fractional and Catl No. 6534A for metric sizes.
 

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute
DIN Length - ANSI Shanks

Machine Screw,
Fractional and
Metric Sizes

Besly Modern Application Taps for Titanium Alloys are for commercially pure Titanium and annealed Titanium alloys such as 6AL-4V.  Designed for use in through holes, the spiral point drives the chips forward. Special relief, point diameter, spiral point and chamfer geometry helps reduce heat that commonly causes tap seizure and breakage on reversal.

These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Choose Catl No. 6525DA for machine screw, Catl No. 6520DA for fractional and Catl No. 6534DA for metric sizes.
 

Besly Modern Application Taps for Titanium Alloys are for commercially pure Titanium and annealed Titanium alloys such as 6AL-4V.  Designed for use in blind holes, a spiral flute is used to pull chips out, reducing the chance of tap breakage. Special back taper, thread and chamfer relief helps to reduce heat that commonly causes tap seizure and breakage on reversal.

These taps are surface treated to reduce friction. They come with bottom (1-2 thread) and modified bottom (2-4 thread) chamfers.

Choose Catl No. 6513A for machine screw and fractional sizes and Catl No. 6544A for metric sizes.
 

Special High Vanadium
Premium Steel (HSSE)

Spiral Flute
3 Flute
DIN Length - ANSI Shanks

Machine Screw,
Fractional and
Metric Sizes

Besly Modern Application Taps for Titanium Alloys are for commercially pure Titanium and annealed Titanium alloys such as 6AL-4V.  Designed for use in blind holes, a spiral flute is used to pull chips out, reducing the chance of tap breakage. Special back taper, thread and chamfer relief helps to reduce heat that commonly causes tap seizure and breakage on reversal.

These taps are surface treated to reduce friction. They come with bottom (1-2 thread) and modified bottom (2-4 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Choose Catl No. 6513DA for machine screw and fractional sizes and Catl No. 6544DA for metric sizes.