![]() |
|
|||||||
![]() |
||||||||
| Taps | Dies | Drills | End Mills | Reamers | Misc | Support | About Us | Site Map |
|
Besly Turboflute Jobbers Length Twist Drills High Speed Steel Wire Gage, |
Catalog Numbers:
T-705-TF, T-755-TF,
T-715-TF
Besly Turboflute Drills have heavy duty parabolic profiled flutes for easy chip flow. Designed for automotive, aerospace, and other high volume metalworking industries, they give longer life and better drilled hole quality while allowing increased feed rates. The split point design seats itself and holds centers. Surface treated drills (Catl No. T-705-TF) are intended for drilling stringy, low and medium strength steels below 120,000 psi ultimate tensile strength. Bright finish drills (Catl No. T-755-TF) are for use in aluminum and other nonferrous materials. Also available in sets (Catl No. T-715-TF). |
|
Besly Turboflute Screw Machine Twist Drills High Speed Steel Wire Gage and |
Catalog Number: T-122-TF
Designed for use on automatic screw machines, these drills have short flutes and a short overall length that provides economy and maximum rigidity without sacrificing cutting ability. Intended for drilling stringy, low and medium-strength steels below 120,000 psi ultimate tensile strength, and for nonferrous materials. |
|
Besly Turboflute Taper Length Twist Drills High Speed Steel Fractional Sizes |
Catalog Number:
T-216-TF
Besly Turboflute drills have heavy duty parabolic profiled flutes for easy chip flow. Designed for automotive and other high volume metal working industries, they give longer life and better drilled hole quality while allowing increased feed rates. The split point design seats itself and holds centers. These heavier web drills are ideal for use in stringy, low and medium strength steels below 120,000 psi ultimate tensile strength, and for use in exotic and difficult-to-machine materials, ferrous and nonferrous. |
|
Besly Turboflute Extra Length Twist Drills High Speed Steel Wire Gage, |
Catalog Number:
T-218-TF
Besly Turboflute drills handle hole depths of up to 12 times their own diameter in a single pass. The unique flute design produces short chips, that pass out of the hole with no clogging or woodpeckering. These drills are designed for drilling materials such as steels below 120,000 psi ultimate tensile strength and iron castings. |
|
Besly Jobbers Length General Purpose Twist Drills High Speed Steel Wire Gage, |
Catalog Numbers:
T-105, T-115
These general purpose surface treated drills are designed with a conventional spiral to perform satisfactorily under as many different conditions as possible. This drill may be used as a high production tool for all jobs except those in which an unusual material or setup presents a difficult machining problem, requiring heavy duty construction (Catl No. T-105). Also available in sets (Catl No. T-115). |
|
Besly Jobbers Length Tanged Twist Drills High Speed Steel Wire Gage, |
Catalog Number:
T-105-T
These surface treated automotive series drills are of the same design and general dimensions as Catl No. T-105 except for the addition of a tang to fit drill holders for the purpose of driving the drill. |
|
Besly Jobbers Length Heavy Duty Twist Drills High Speed Steel Wire Gage, |
Catalog Number:
T-117
These surface treated heavy duty drills have a heavy web for high production drilling in tough materials. |
|
Besly Jobbers Length Fast Spiral Twist Drills High Speed Steel Wire Gage, |
Catalog Number:
T-405
These bright finish fast spiral drills with open flutes are for drilling aluminum, magnesium and die castings. |
|
Besly Jobbers Length General Purpose Twist Drills High Speed Steel Wire Gage, |
Catalog Numbers:
T-1055, T-1155
These general purpose bright finish drills are similar in construction to Catl No. T-105 but are for use in materials where smooth, bright flutes are required for optimum drilling performance and chip removal (Catl No. T-1055). Also available in sets (Catl No. T-1155). |
|
Besly Jobbers Length Cobalt Twist Drills Super Cobalt Steel Wire Gage, |
Catalog Numbers:
T-805, T-815
These drills are made of super cobalt steel for resistance against the high temperatures generated by drilling in tough, hard materials such as high temperature alloys and stainless steels. High drill hardness also makes these tools outstanding when used in highly abrasive materials (Catl No. T-805). Also available in sets (Catl No. T-815). |
|
Besly Taper Length Twist Drills High Speed Steel Wire Gage and |
Catalog Number:
T-102
These long series bright finish general purpose drills are for use on jobs where an extended drill length is needed to produce deeper holes or where a longer reach is needed to drill in difficult locations. Sizes 33/64" and larger are supplied surface treated. |
|
Besly Taper Length Tanged Twist Drills High Speed Steel Fractional Sizes |
Catalog Number:
T-102-T
These automotive series drills have the same dimensions and design as Catl No. T-102, but with tangs to fit drill holders for the purpose of driving the drill. |
|
Besly Screw Machine Twist Drills High Speed Steel Wire Gage, |
Catalog Numbers:
T-122, T-125
Designed for use on automatic screw machines, these drills have short flutes and short overall length to provide economy and maximum rigidity without sacrificing cutting ability. Sizes over 1" furnished with reduced shanks. Sizes larger than 1/2" are surface treated (Catl No. T-122). Also available in sets (Catl No. T-125). |
|
Besly Screw Machine Aircraft Drill, Type C Twist Drills High Speed Steel Wire Gage and |
Catalog Number:
T-190
These drills are made to the A.I.A. NAS-907 Type C Standards for Aircraft Drills. They are designed for portable power tools or machines for drilling holes in hard and tough sheet metal alloys of the heat resistant, stainless and titanium types. Of sturdy construction, their split point allows ease of penetration and has made them popular in automobile body work and in the construction industry. |
|
Besly Metalworking Twist Drills High Speed Steel Fractional Sizes |
Catalog Number:
T-275
These general purpose surface treated drills are designed for use in power drill presses and portable electric drills. The shanks will fit any standard 1/2" holder and are 2-1/4" long. |
|
Besly Drill Blanks Hardened & Ground High Speed Steel Wire Gage, |
Catalog Numbers:
T-305, T-3155
Besly drill blanks are hardened full length and ground to tolerances of +.0000" -.0005". They are used for many purposes including special gages and punches, or may be used by the customer to make special tools for their own particular operation (Catl No. T-305). Also available in sets (Catl No. T-3155). |
|
Besly Taper Shank Twist Drills High Speed Steel Fractional Sizes |
Catalog Number:
T-100
These general purpose surface treated high production drills are provided with a standard taper shank to allow quick change of tools on various machining operations. |
|
Besly Taper Shank Twist Drills High Speed Steel Fractional Sizes |
Catalog Number:
T-100-LG
These general purpose surface treated drills are provided with taper shanks larger than standard for use in machining operations. |
|
Besly Taper Shank Twist Drills High Speed Steel Fractional Sizes |
Catalog Number:
T-100-SM
These general purpose surface treated drills are provided with taper shanks smaller than standard for use in machining operations. |
|
Besly Jobbers Length Carbide Tipped
Heavy Duty Drills Carbide Tipped Wire Gage, |
Catalog Number: 828
These drills contain heavy duty high speed steel bodies that provide maximum support to the carbide tip for production drilling of cast iron, nonferrous metals and non-metals. They are not recommended for drilling steel. |
|
Besly Taper Length Carbide Tipped Tanged Drills Carbide Tipped Fractional Sizes |
Catalog Number: 846
Designed for production drilling of cast iron, nonferrous metals and non-metals, the greater length of these drills increases their effective reach through bushings, etc. The straight shanks are tanged for use in split sleeve drill drivers. Not recommended for drilling steel. |
|
Besly Carbide Tipped Masonry Drills
Carbide Tipped Fractional Sizes |
Catalog Number: 851
Besly Masonry drills will clear drillings faster due to greater flute capacity. use on all types of masonry, especially softer, faster drilling materials and deeper holes. |
|
Besly Carbide Tipped Straight Flute
Drills Carbide Tipped High Speed Steel Fractional Sizes |
Catalog Number: 861
Designed for drilling hardened steels from 45 to 65 Rockwell "C", these drills should be used with hand feed only, as power feeds may result in unnecessary breakage. |
|
Besly Spotting and Chamfering Drills
High Speed Steel Fractional Sizes |
Catalog Numbers:
T-070
Provides N/C machining centers with a twofold advantage of accurately spotting holes to be drilled, plus chamfering of drilled holes. |
|
Besly Spotting and Centering Drills
High Speed Steel Fractional Sizes |
Catalog Numbers:
T-113
Designed to produce accurate, true centers in all types of screw machine work, to obtain a starting spot for other drills. Short flute and overall length, and no body clearance permits chucking close to the point. Constant web thickness requires no thinning when repointing. Furnished with 118 included angle drill point.. |
|
Besly Centering Drills High Speed Steel Fractional Sizes |
Catalog Numbers:
T-277
These drills, of very short overall flute length, have been designed for centering work, where their extreme rigidity would reduce runout and eccentricity. For the same reason on larger sizes, they have been quite successful as starting drills in screw machine drilling. |
|
|
![]() |
![]() |
Made in USA |
![]() |
| Sales Office
|
|||
| Taps | Dies | Drills | End Mills | Reamers | Misc | Support | About Us | Site Map | Home | |||
| Copyright 2009 by
Besly Cutting Tools, Inc. All Rights Reserved. Comments? webmaster@besly.com |
|||