|
|
|
|||||||
|
|
||||||||
| Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Home |
|
Besly Single End Regular Length End Mills Carbide Tipped |
Catalog Number: 866
These straight shank, straight flute Besly End Mills
are for milling soft cast steel, cast and malleable iron. Use moderate
speeds and feeds - feeds less than .002" per tooth per revolution may
result in fast dulling of cutting edges. Note: Click the EDP No to check availability. |
| Size | Decimal Equivalent | No of Flutes |
EDP No | Pkg Qty |
Shank Dia. |
Length of Carbide Tip |
Overall Length |
|---|---|---|---|---|---|---|---|
| 1/4 | .2500 | 4 | 20239 | 1 | 3/8 | 1/2 | 2-1/2 |
| 5/16 | .3125 | 4 | 20246 | 1 | 3/8 | 5/8 | 2-1/2 |
| 3/8 | .3750 | 4 | 20247 | 1 | 3/8 | 5/8 | 2-1/2 |
| 7/16 | .4375 | 4 | 20248 | 1 | 3/8 | 1 | 2-11/16 |
| 1/2 | .5000 | 4 | 20249 | 1 | 1/2 | 1 | 3-1/4 |
| 9/16 | .5625 | 4 | 20256 | 1 | 1/2 | 1 | 3-3/8 |
| 5/8 | .6250 | 4 | 20257 | 1 | 1/2 | 1 | 3-3/8 |
| 11/16 | .6875 | 4 | 20258 | 1 | 5/8 | 1 | 3-3/8 |
| 3/4 | .7500 | 4 | 20259 | 1 | 5/8 | 1 | 3-5/8 |
| 13/16 | .8125 | 4 | 20266 | 1 | 5/8 | 1 | 3-5/8 |
| 7/8 | .8750 | 4 | 20267 | 1 | 5/8 | 1-1/4 | 4 |
| 15/16 | .9375 | 4 | 20268 | 1 | 7/8 | 1-1/4 | 4 |
| 1 | 1.0000 | 4 | 20269 | 1 | 7/8 | 1-1/4 | 4 |
| 1-1/8 | 1.1250 | 4 | 20276 | 1 | 1 | 1-1/4 | 4-1/4 |
| 1-1/4 | 1.2500 | 4 | 20277 | 1 | 1 | 1-1/4 | 4-1/4 |
| 1-1/2 | 1.5000 | 4 | 20279 | 1 | 1-1/4 | 1-1/2 | 4-1/2 |
| 1-3/4 | 1.7500 | 6 | 20287 | 1 | 1-1/4 | 1-1/2 | 4-1/2 |
| 2 | 2.0000 | 6 | 20289 | 1 | 1-1/4 | 1-1/2 | 4-1/2 |
 |
 |
 |
 Made in USA |
 |
Sales Office
16200 Woodmint Lane
South Beloit, IL 61080
(815) 389-2231
fax (815) 389-1339
sales@besly.com |
|||
| Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Site Map | Home | |||
| Copyright 2000-2010 by
Besly Cutting Tools, Inc. All Rights Reserved. Comments? webmaster@besly.com |
|||
