|
|
|
|||||||
|
|
||||||||
| Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Home |
|
Besly Modern Application Taps for Titanium Alloys Special High Vanadium Spiral Flute Metric Sizes: |
Catalog Number: 6544DA
|
| |
  All dimensions are in inches. |
|||
|
Besly Modern Application Taps for Titanium Alloys Catl No. 6544DA Metric Sizes |
||||
 |
 |
|||
|
Tap Size & TPI |
No. of Flutes | Cham Type* | Pitch Limit | Surface Treat | EDP No | Pkg Qty |
Nominal Size 0d1 |
Overall Length I1 |
Thread Length I2 |
Thread + Neck I3 |
Shank Dia. 0d2 |
Square Size q |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M3 x .5 | 3 | Mod | D3 | 7 | 19901 | 12 | M3 | 2.205 | .312 | .709 | .141 | .110 |
| M3 x .5 | 3 | Bot | D3 | 7 | 19950 | 12 | M3 | 2.205 | .312 | .709 | .141 | .110 |
| M3.5 x .6 | 3 | Mod | D4 | 7 | 19902 | 12 | M3.5 | 2.205 | .375 | .787 | .141 | .110 |
| M3.5 x .6 | 3 | Bot | D4 | 7 | 19951 | 12 | M3.5 | 2.205 | .375 | .787 | .141 | .110 |
| M4 x .7 | 3 | Mod | D4 | 7 | 19903 | 12 | M4 | 2.480 | .375 | .827 | .168 | .131 |
| M4 x .7 | 3 | Bot | D4 | 7 | 19952 | 12 | M4 | 2.480 | .375 | .827 | .168 | .131 |
| M5 x .8 | 3 | Mod | D4 | 7 | 19904 | 12 | M5 | 2.756 | .500 | .984 | .194 | .152 |
| M5 x .8 | 3 | Bot | D4 | 7 | 19953 | 12 | M5 | 2.756 | .500 | .984 | .194 | .152 |
| M6 x 1 | 3 | Mod | D5 | 7 | 19905 | 12 | M6 | 3.150 | .625 | 1.181 | .255 | .191 |
| M6 x 1 | 3 | Bot | D5 | 7 | 19954 | 12 | M6 | 3.150 | .625 | 1.181 | .255 | .191 |
| M7 x 1 | 3 | Mod | D5 | 7 | 19906 | 12 | M7 | 3.543 | .688 | 1.378 | .318 | .238 |
| M7 x 1 | 3 | Bot | D5 | 7 | 19955 | 12 | M7 | 3.543 | .688 | 1.378 | .318 | .238 |
| M8 x 1.25 | 3 | Mod | D5 | 7 | 19908 | 12 | M8 | 3.543 | .688 | 1.378 | .318 | .238 |
| M8 x 1.25 | 3 | Bot | D5 | 7 | 19957 | 12 | M8 | 3.543 | .688 | 1.378 | .318 | .238 |
| M8 x 1 | 3 | Mod | D5 | 7 | 19907 | 12 | M8 | 3.543 | .688 | 1.378 | .318 | .238 |
| M8 x 1 | 3 | Bot | D5 | 7 | 19956 | 12 | M8 | 3.543 | .688 | 1.378 | .318 | .238 |
| M10 x 1.5 | 3 | Mod | D6 | 7 | 19910 | 12 | M10 | 3.937 | .750 | 1.535 | .381 | .286 |
| M10 x 1.5 | 3 | Bot | D6 | 7 | 19959 | 12 | M10 | 3.937 | .750 | 1.535 | .381 | .286 |
| M10 x 1.25 | 3 | Mod | D5 | 7 | 19909 | 12 | M10 | 3.937 | .750 | 1.535 | .381 | .286 |
| M10 x 1.25 | 3 | Bot | D5 | 7 | 19958 | 12 | M10 | 3.937 | .750 | 1.535 | .381 | .286 |
| M12 x 1.75 | 3 | Mod | D6 | 7 | 19912 | 12 | M12 | 4.331 | .938 | - | .367 | .275 |
| M12 x 1.75 | 3 | Bot | D6 | 7 | 19961 | 12 | M12 | 4.331 | .938 | - | .367 | .275 |
| M12 x 1.25 | 3 | Mod | D5 | 7 | 19911 | 12 | M12 | 4.331 | .938 | - | .367 | .275 |
| M12 x 1.25 | 3 | Bot | D5 | 7 | 19960 | 12 | M12 | 4.331 | .938 | - | .367 | .275 |
| * Mod = Modified-Bottom (2-4 threads) |
 |
 |
 |
 Made in USA |
 |
Sales Office
16200 Woodmint Lane
South Beloit, IL 61080
(815) 389-2231
fax (815) 389-1339
sales@besly.com |
|||
| Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Site Map | Home | |||
| Copyright 2000-2010 by
Besly Cutting Tools, Inc. All Rights Reserved. Comments? webmaster@besly.com |
|||
Besly
Modern Application Taps for Titanium Alloys are for commercially pure
Titanium and annealed Titanium alloys such as 6AL-4V. Designed for
use in blind holes, a spiral flute is used to pull chips out, reducing the
chance of tap breakage. Special back taper, thread and chamfer relief
helps to reduce heat that commonly causes tap seizure and breakage on
reversal. These taps are surface treated to reduce friction. They come
with bottom (1-2 thread) and modified bottom (2-4 thread) chamfers. The
DIN lengths with ANSI shanks feature accommodates the sometimes needed
extra reach without the need for special taps and set-ups.