Besly Logo Besly Slogan
Tap Pic
Taps Dies Drills End Mills Reamers Misc Distributor About Us Home
Besly 
Modern Application Taps for Titanium Alloys

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute
DIN Length - ANSI Shanks

Machine Screw Sizes:
4 | 5 | 6 | 8 | 10 | 12

 

 Catalog Numbers: 6525DA

Besly Modern Application Taps for Titanium Alloys 
Besly Modern Application Taps for Titanium Alloys are for commercially pure Titanium and annealed Titanium alloys such as 6AL-4V.  Designed for use in through holes, the spiral point drives the chips forward. Special relief, point diameter, spiral point and chamfer geometry helps reduce heat that commonly causes tap seizure and breakage on reversal. These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Please call 800 435-2965 for current net pricing.

Note: Click the EDP No to check availability.
  
All dimensions are in inches.                 
  Besly Modern Application
 Taps for Titanium Alloys
Catl No. 6525DA
Machine Screw Sizes		    
 
Besly Surface Treatments Besly Drill Selector
Tap Size
& TPI		 No. of Flutes Cham Type P.D. Limits Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		 Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
4-40 2 Plug H2 7 14976 12 #4 2.205 .312 .709 .141 .110
4-40 2 Plug H4 7 14977 12 #4 2.205 .312 .709 .141 .110
4-48 2 Plug H2 7 14978 12 #4 2.205 .312 .709 .141 .110
5-40 3 Plug H2 7 14979 12 #5 2.205 .312 .709 .141 .110
6-32 3 Plug H3 7 14980 12 #6 2.205 .375 .787 .141 .110
6-32 3 Plug H5 7 14981 12 #6 2.205 .375 .787 .141 .110
6-40 3 Plug H3 7 14982 12 #6 2.205 .375 .787 .141 .110
8-32 3 Plug H3 7 14983 12 #8 2.480 .375 .827 .168 .131
8-32 3 Plug H5 7 14984 12 #8 2.480 .375 .827 .168 .131
8-36 3 Plug H3 7 14985 12 #8 2.480 .375 .827 .168 .131
10-24 3 Plug H3 7 14986 12 #10 2.756 .500 .984 .194 .152
10-24 3 Plug H5 7 14987 12 #10 2.756 .500 .984 .194 .152
10-32 3 Plug H3 7 14988 12 #10 2.756 .500 .984 .194 .152
10-32 3 Plug H5 7 14989 12 #10 2.756 .500 .984 .194 .152
12-24 3 Plug H3 7 14990 12 #12 3.150 .500 1.142 .220 .165
12-28 3 Plug H3 7 14991 12 #12 3.150 .500 1.142 .220 .165
Go to the top of this page.

Made in USA
Sales Office Small Logo 16200 Woodmint Lane Small Logo South Beloit, IL 61080 Small Logo (815) 389-2231 Small Logo fax (815) 389-1339 Small Logo sales@besly.com
Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Site Map | Home
Copyright 2000-2010 by Besly Cutting Tools, Inc. All Rights Reserved.
Comments? webmaster@besly.com