Besly Modern Application Taps

Besly
Modern Application Taps
for Nickel Alloys

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute
DIN Length - ANSI Shanks

Metric Sizes:
M3 | M3.5 | M4 | M5 | M6 | M7 | M8 | M10 | M12 | M14 | M16 | M18

Catalog Number: 6334DA

Besly Modern Application Taps for Nickel Alloys

Besly Modern Application Taps for Nickel Alloys are for tough to machine Nickel Base Alloys such as Inconel, Hastelloy, Waspalloy, Incoloy, Astraloy, Rene and Monel. Designed for use in through holes, a spiral point is used to drive chips forward, reducing the chance of chip breakage. These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Please call 800 435-2965 for current net pricing.

Note: Click the EDP No to check availability.

Tap Size & TPI	No. of Flutes	Cham Type	Pitch Limit	Surface Treat	EDP No	Pkg Qty	Nominal Size 0d₁	Overall Length I₁	Thread Length I₂	Thread + Neck I₃	Shank Dia. 0d₂	Square Size q
M3 x .5	3	Plug	D3	47	17108	12	M3	2.205	.312	.709	.141	.110
M3.5 x .6	3	Plug	D4	47	17109	12	M3.5	2.205	.375	.787	.141	.110
M4 x .7	3	Plug	D4	47	17111	12	M4	2.480	.375	.827	.168	.131
M5 x .8	3	Plug	D4	47	17112	12	M5	2.756	.500	.984	.194	.152
M6 x 1	3	Plug	D5	47	17113	12	M6	3.150	.625	1.181	.255	.191
M7 x 1	3	Plug	D5	47	17114	12	M7	3.543	.688	1.378	.318	.238
M8 x 1.25	3	Plug	D5	47	17116	12	M8	3.543	.688	1.378	.318	.238
M8 x 1	3	Plug	D5	47	17115	12	M8	3.543	.688	1.378	.318	.238
M10 x 1.5	3	Plug	D6	47	17118	12	M10	3.937	.750	1.535	.381	.286
M10 x 1.25	3	Plug	D5	47	17117	12	M10	3.937	.750	1.535	.381	.286
M12 x 1.75	3	Plug	D6	47	17120	12	M12	4.331	.938	-	.367	.275
M12 x 1.25	3	Plug	D5	47	17119	12	M12	4.331	.938	-	.367	.275
M14 x 2	3	Plug	D7	47	17122	3	M14	4.331	1.000	-	.429	.322
M14 x 1.5	3	Plug	D6	47	17121	3	M14	4.331	1.000	-	.429	.322
M16 x 2	3	Plug	D7	47	17124	3	M16	4.331	1.094	-	.480	.360
M16 x 1.5	3	Plug	D6	47	17123	3	M16	4.331	1.094	-	.480	.360
M18 x 2	3	Plug	D7	47	17134	3	M18	4.921	1.219	-	.542	.406
M18 x 1.5	3	Plug	D6	47	17133	3	M18	4.921	1.219	-	.542	.406



Taps	Dies	Drills	End Mills	Reamers	Misc	Distributor	About Us	Home


		Made in USA

Sales Office 16200 Woodmint Lane South Beloit, IL 61080 (815) 389-2231 fax (815) 389-1339 sales@besly.com
Taps \| Dies \| Drills \| End Mills \| Reamers \| Misc \| Distributor \| About Us \| Site Map \| Home
Copyright 2000-2010 by Besly Cutting Tools, Inc. All Rights Reserved. Comments? webmaster@besly.com

				All dimensions are in inches.
	Besly Modern Application Taps for Nickel Alloys Catl No. 6334DA Metric Sizes