Besly Logo Besly Slogan
Tap Pic
Taps Dies Drills End Mills Reamers Misc Distributor About Us Home
Besly 
Modern Application Taps for Nickel Alloys

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute


Metric Sizes:
M3 | M3.5 | M4 | M5 | M6 | M7 | M8 | M10 | M12 | M14 | M16 | M18

 Catalog Number: 6334A
 

Besly Modern Application Taps for Nickel AlloysBesly Modern Application Taps for Nickel Alloys are for tough to machine Nickel Base Alloys such as Inconel, Hastelloy, Waspalloy, Incoloy, Astraloy, Rene and Monel. Designed for use in through holes, a spiral point is used to drive chips forward, reducing the chance of chip breakage. These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers.

Please call 800 435-2965 for current net pricing.

Note: Click the EDP No to check availability.
 




 


All dimensions are in inches.                 
  Besly Modern Application
 Taps for Nickel Alloys
Catl No. 6334A
Metric Sizes		    
 
Besly Surface Treatments Besly Drill Selector
Tap Size
& TPI		 No. of Flutes Cham Type Pitch Limit Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		 Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
M3 x .5 3 Plug D3 47 16954 12 M3 1.938 .312 .625 .141 .110
M3.5 x .6 3 Plug D4 47 16955 12 M3.5 2.000 .375 .688 .141 .110
M4 x .7 3 Plug D4 47 16956 12 M4 2.125 .375 .750 .168 .131
M5 x .8 3 Plug D4 47 16957 12 M5 2.375 .500 .875 .194 .152
M6 x 1 3 Plug D5 47 16958 12 M6 2.500 .625 1.000 .255 .191
M7 x 1 3 Plug D5 47 16959 12 M7 2.719 .688 1.125 .318 .238
M8 x 1.25 3 Plug D5 47 16961 12 M8 2.719 .688 1.125 .318 .238
M8 x 1 3 Plug D5 47 16960 12 M8 2.719 .688 1.125 .318 .238
M10 x 1.5 3 Plug D6 47 16963 12 M10 2.938 .750 1.250 .381 .286
M10 x 1.25 3 Plug D5 47 16962 12 M10 2.938 .750 1.250 .381 .286
M12 x 1.75 3 Plug D6 47 16965 12 M12 3.375 .938 - .367 .275
M12 x 1.25 3 Plug D5 47 16964 12 M12 3.375 .938 - .367 .275
M14 x 2 3 Plug D7 47 16967 3 M14 3.594 1.000 - .429 .322
M14 x 1.5 3 Plug D6 47 16966 3 M14 3.594 1.000 - .429 .322
M16 x 2 3 Plug D7 47 16969 3 M16 3.812 1.094 - .480 .360
M16 x 1.5 3 Plug D6 47 16968 3 M16 3.812 1.094 - .480 .360
M18 x 2 3 Plug D7 47 16971 3 M18 4.031 1.094 - .542 .406
M18 x 1.5 3 Plug D6 47 16970 3 M18 4.031 1.094 - .542 .406
Go to the top of this page.

Made in USA
Sales Office Small Logo 16200 Woodmint Lane Small Logo South Beloit, IL 61080 Small Logo (815) 389-2231 Small Logo fax (815) 389-1339 Small Logo sales@besly.com
Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Site Map | Home
Copyright 2000-2010 by Besly Cutting Tools, Inc. All Rights Reserved.
Comments? webmaster@besly.com