Besly Logo Besly Slogan
Tap Pic
Taps Dies Drills End Mills Reamers Misc Distributor About Us Home
Besly 
Modern Application Taps for Nickel Alloys

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute
DIN Length - ANSI Shanks


Machine Screw Sizes:
2 | 3 | 4 | 5 | 6 | 8 | 10

 Catalog Number: 6325DA

Besly Modern Application Taps for Nickel Alloys

Besly Modern Application Taps for Nickel Alloys are for tough to machine Nickel Base Alloys such as Inconel, Hastelloy, Waspalloy, Incoloy, Astraloy, Rene and Monel. Designed for use in through holes, a spiral point is used to drive chips forward, reducing the chance of chip breakage. These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Please call 800 435-2965 for current net pricing.

Note: Click the EDP No to check availability.
 
  
All dimensions are in inches.                 
  Besly Modern Application
 Taps for Nickel Alloys
Catl No. 6325DA
Machine Screw Sizes		    
 
Besly Surface Treatments Besly Drill Selector
Tap Size
& TPI		 No. of Flutes Cham Type P.D. Limits Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		 Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
2-56 2 Plug H2 47 15487 12 #2 1.772 .250 .551 .141 .110
3-48 2 Plug H2 47 16972 12 #3 1.969 .312 .551 .141 .110
4-40 2 Plug H2 47 16973 12 #4 2.205 .312 .709 .141 .110
4-48 2 Plug H2 47 16974 12 #4 2.205 .312 .709 .141 .110
5-40 3 Plug H2 47 16975 12 #5 2.205 .312 .709 .141 .110
6-32 3 Plug H2 47 16976 12 #6 2.205 .375 .787 .141 .110
6-32 3 Plug H3 47 16977 12 #6 2.205 .375 .787 .141 .110
6-40 3 Plug H2 47 16978 12 #6 2.205 .375 .787 .141 .110
8-32 3 Plug H2 47 16979 12 #8 2.480 .375 .827 .168 .131
8-32 3 Plug H3 47 16980 12 #8 2.480 .375 .827 .168 .131
10-24 3 Plug H3 47 16981 12 #10 2.756 .500 .984 .194 .152
10-32 3 Plug H2 47 16982 12 #10 2.756 .500 .984 .194 .152
10-32 3 Plug H3 47 16983 12 #10 2.756 .500 .984 .194 .152
Go to the top of this page.

Made in USA
Sales Office Small Logo 16200 Woodmint Lane Small Logo South Beloit, IL 61080 Small Logo (815) 389-2231 Small Logo fax (815) 389-1339 Small Logo sales@besly.com
Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Site Map | Home
Copyright 2000-2010 by Besly Cutting Tools, Inc. All Rights Reserved.
Comments? webmaster@besly.com