Besly Logo Besly Slogan
Tap Pic
Taps Dies Drills End Mills Reamers Misc Distributor About Us Home
Besly 
Modern Application Taps 
for Nickel Alloys

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute


Machine Screw Sizes:
2 | 3 | 4 | 5 | 6 | 8 | 10

 Catalog Number: 6325A
 
Besly Modern Application Taps for Nickel AlloysBesly Modern Application Taps for Nickel Alloys are for tough to machine Nickel Base Alloys such as Inconel, Hastelloy, Waspalloy, Incoloy, Astraloy, Rene and Monel. Designed for use in through holes, a spiral point is used to drive chips forward, reducing the chance of chip breakage. These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers.

Please call 800 435-2965 for current net pricing.

Note: Click the EDP No to check availability.
  
All dimensions are in inches.                 
  Besly Modern Application
 Taps for Nickel Alloys
Catl No. 6325A
Machine Screw Sizes		    
 
Besly Surface Treatments Besly Drill Selector
Tap Size
& TPI		 No. of Flutes Cham Type P.D. Limits Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		 Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
2-56 2 Plug H2 47 15486 12 #2 1.750 .250 .438 .141 .110
3-48 2 Plug H2 47 16889 12 #3 1.812 .312 .500 .141 .110
4-40 2 Plug H2 47 16890 12 #4 1.875 .312 .562 .141 .110
4-40 2 Plug H3 47 16891 12 #4 1.875 .312 .562 .141 .110
4-40 2 Plug H4 47 16892 12 #4 1.875 .312 .562 .141 .110
4-48 2 Plug H2 47 16893 12 #4 1.875 .312 .562 .141 .110
5-40 3 Plug H2 47 16894 12 #5 1.938 .312 .625 .141 .110
6-32 3 Plug H2 47 16896 12 #6 2.000 .375 .688 .141 .110
6-32 3 Plug H3 47 16897 12 #6 2.000 .375 .688 .141 .110
6-32 3 Plug H4 47 16898 12 #6 2.000 .375 .688 .141 .110
6-32 3 Plug H5 47 16899 12 #6 2.000 .375 .688 .141 .110
6-32 3 Plug H7 47 16214 12 #6 2.000 .375 .688 .141 .110
6-40 3 Plug H2 47 16215 12 #6 2.000 .375 .688 .141 .110
  Go to the top of this page.
Tap Size
& TPI		 No. of Flutes Cham Type P.D. Limits Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		 Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
8-32 3 Plug H2 47 16221 12 #8 2.125 .375 .750 .168 .131
8-32 3 Plug H3 47 16222 12 #8 2.125 .375 .750 .168 .131
8-32 3 Plug H4 47 16223 12 #8 2.125 .375 .750 .168 .131
8-32 3 Plug H5 47 16224 12 #8 2.125 .375 .750 .168 .131
8-32 3 Plug H6 47 16225 12 #8 2.125 .375 .750 .168 .131
8-32 3 Plug H7 47 16230 12 #8 2.125 .375 .750 .168 .131
10-24 3 Plug H3 47 16231 12 #10 2.375 .500 .875 .194 .152
10-24 3 Plug H4 47 16900 12 #10 2.375 .500 .875 .194 .152
10-24 3 Plug H5 47 16901 12 #10 2.375 .500 .875 .194 .152
10-24 3 Plug H7 47 16906 12 #10 2.375 .500 .875 .194 .152
10-32 3 Plug H2 47 16907 12 #10 2.375 .500 .875 .194 .152
10-32 3 Plug H3 47 16908 12 #10 2.375 .500 .875 .194 .152
10-32 3 Plug H4 47 16909 12 #10 2.375 .500 .875 .194 .152
10-32 3 Plug H5 47 16913 12 #10 2.375 .500 .875 .194 .152
10-32 3 Plug H6 47 16914 12 #10 2.375 .500 .875 .194 .152
10-32 3 Plug H7 47 16915 12 #10 2.375 .500 .875 .194 .152
Go to the top of this page.

Made in USA
Sales Office Small Logo 16200 Woodmint Lane Small Logo South Beloit, IL 61080 Small Logo (815) 389-2231 Small Logo fax (815) 389-1339 Small Logo sales@besly.com
Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Site Map | Home
Copyright 2000-2010 by Besly Cutting Tools, Inc. All Rights Reserved.
Comments? webmaster@besly.com