Besly Logo Besly Slogan
Tap Pic
Taps Dies Drills End Mills Reamers Misc Distributor About Us Home
Besly 
Modern Application Taps 
for Stainless Steel

Special High Vanadium
Premium Steel (HSSE)

Spiral Flute
3 and 4 Flute


Metric Sizes:
M3 | M3.5 | M4 | M5 | M6 | M7 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24

 Catalog Number: 6044A  

Besly Modern Application Taps for Stainless SteelBesly Modern Application Taps for Stainless Steel are for tough to machine Stainless Steel Alloys and Precipitation Hardening (PH) Stainless Steels. Designed for use in blind holes, a spiral flute is used to pull the chips out of the holes, reducing the chance of torn or rough threads. These taps are surface treated to reduce loading and galling. They are available  with bottom (1-2 thread) or modified-bottom (2-4 thread) chamfers.

Please call 800 435-2965 for current net pricing.

Note: Click the EDP No to check availability.
 




 


All dimensions are in inches.                 
  Besly Modern Application
 Taps for Stainless Steel
Catl No. 6044A
Metric Sizes		    
 
Besly Surface Treatments Besly Drill Selector
Tap Size
& TPI		 No. of Flutes Cham Type* Pitch Limit Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		 Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
M3 x .5 3 Mod D3 47 16418 12 M3 1.938 .312 .625 .141 .110
M3 x .5 3 Bot D3 47 16419 12 M3 1.938 .312 .625 .141 .110
M3.5 x .6 3 Mod D4 47 16420 12 M3.5 2.000 .375 .688 .141 .110
M3.5 x .6 3 Bot D4 47 16421 12 M3.5 2.000 .375 .688 .141 .110
M4 x .7 3 Mod D4 47 16422 12 M4 2.125 .375 .750 .168 .131
M4 x .7 3 Bot D4 47 16423 12 M4 2.125 .375 .750 .168 .131
M5 x .8 3 Mod D4 47 16424 12 M5 2.375 .500 .875 .194 .152
M5 x .8 3 Bot D4 47 16425 12 M5 2.375 .500 .875 .194 .152
M6 x 1 3 Mod D5 47 16426 12 M6 2.500 .625 1.000 .255 .191
M6 x 1 3 Bot D5 47 16427 12 M6 2.500 .625 1.000 .255 .191
M7 x 1 3 Mod D5 47 16428 12 M7 2.719 .688 1.125 .318 .238
M7 x 1 3 Bot D5 47 16429 12 M7 2.719 .688 1.125 .318 .238
M8 x 1.25 3 Mod D5 47 16436 12 M8 2.719 .688 1.125 .318 .238
M8 x 1.25 3 Bot D5 47 16437 12 M8 2.719 .688 1.125 .318 .238
M8 x 1 3 Mod D5 47 16430 12 M8 2.719 .688 1.125 .318 .238
M8 x 1 3 Bot D5 47 16431 12 M8 2.719 .688 1.125 .318 .238
M10 x 1.5 3 Mod D6 47 16446 12 M10 2.938 .750 1.250 .381 .286
M10 x 1.5 3 Bot D6 47 16447 12 M10 2.938 .750 1.250 .381 .286
M10 x 1.25 3 Mod D5 47 16438 12 M10 2.938 .750 1.250 .381 .286
M10 x 1.25 3 Bot D5 47 16439 12 M10 2.938 .750 1.250 .381 .286
M12 x 1.75 3 Mod D6 47 16456 12 M12 3.375 .938 - .367 .275
M12 x 1.75 3 Bot D6 47 16457 12 M12 3.375 .938 - .367 .275
M12 x 1.25 3 Mod D5 47 16448 12 M12 3.375 .938 - .367 .275
M12 x 1.25 3 Bot D5 47 16449 12 M12 3.375 .938 - .367 .275
 * Mod = Modified-Bottom (2-4 threads) Go to the top of this page.
Tap Size
& TPI		 No. of Flutes Cham Type* Pitch Limit Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		 Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
M14 x 2 3 Mod D7 47 16466 3 M14 3.594 1.000 - .429 .322
M14 x 2 3 Bot D7 47 16467 3 M14 3.594 1.000 - .429 .322
M14 x 1.5 3 Mod D6 47 16458 3 M14 3.594 1.000 - .429 .322
M14 x 1.5 3 Bot D6 47 16459 3 M14 3.594 1.000 - .429 .322
M16 x 2 3 Mod D7 47 16476 3 M16 3.812 1.094 - .480 .360
M16 x 2 3 Bot D7 47 16477 3 M16 3.812 1.094 - .480 .360
M16 x 1.5 3 Mod D6 47 16468 3 M16 3.812 1.094 - .480 .360
M16 x 1.5 3 Bot D6 47 16469 3 M16 3.812 1.094 - .480 .360
M18 x 1.5 3 Mod D6 47 16478 3 M18 4.031 1.094 - .542 .406
M18 x 1.5 3 Bot D6 47 16479 3 M18 4.031 1.094 - .542 .406
M20 x 2.5 4 Mod D7 47 16487 3 M20 4.469 1.219 - .652 .489
M20 x 2.5 4 Bot D7 47 16488 3 M20 4.469 1.219 - .652 .489
M20 x 1.5 4 Mod D6 47 16485 3 M20 4.469 1.219 - .652 .489
M20 x 1.5 4 Bot D6 47 16486 3 M20 4.469 1.219 - .652 .489
M22 x 2.5 4 Mod D7 47 16491 3 M22 4.688 1.344 - .697 .523
M22 x 2.5 4 Bot D7 47 16492 3 M22 4.688 1.344 - .697 .523
M22 x 1.5 4 Mod D6 47 16489 3 M22 4.688 1.344 - .697 .523
M22 x 1.5 4 Bot D6 47 16490 3 M22 4.688 1.344 - .697 .523
M24 x 3 4 Mod D8 47 16495 3 M24 4.906 1.344 - .760 .570
M24 x 3 4 Bot D8 47 16496 3 M24 4.906 1.344 - .760 .570
M24 x 2 4 Mod D7 47 16493 3 M24 4.906 1.344 - .760 .570
M24 x 2 4 Bot D7 47 16494 3 M24 4.906 1.344 - .760 .570
 * Mod = Modified-Bottom (2-4 threads) Go to the top of this page.

Made in USA
Sales Office Small Logo 16200 Woodmint Lane Small Logo South Beloit, IL 61080 Small Logo (815) 389-2231 Small Logo fax (815) 389-1339 Small Logo sales@besly.com
Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Site Map | Home
Copyright 2000-2010 by Besly Cutting Tools, Inc. All Rights Reserved.
Comments? webmaster@besly.com