Besly Logo Besly Slogan
Tap Pic
Taps Dies Drills End Mills Reamers Misc Distributor About Us Home
Besly 
Modern Application Taps for Stainless Steel

Special High Vanadium
Premium Steel (HSSE)

Spiral Flute
2, 3 and 4 Flute
DIN Length - ANSI Shanks


Machine Screw Sizes:
3 | 4 | 5 | 6 | 8 | 10 | 12

Fractional Sizes:
1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 9/16 | 5/8 | 3/4 | 7/8 | 1

 Catalog Number: 6013DA
 
  Besly Modern Application Taps for Stainless Steel

Besly Modern Application Taps for Stainless Steel are for tough to machine Stainless Steel Alloys and Precipitation Hardening (PH) Stainless Steels. Designed for use in blind holes, a spiral flute is used to pull the chips out of the holes, reducing the chance of torn or rough threads. These taps are surface treated to reduce loading and galling. They are available  with bottom (1-2 thread) or modified-bottom (2-4 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Please call 800 435-2965 for current net pricing.

Note: Click the EDP No to check availability.
 
All dimensions are in inches.                 
  Besly Modern Application
 Taps for Stainless Steel
Catl No. 6013DA
Machine Screw Sizes		    
 
Besly Surface Treatments Besly Drill Selector
Tap Size
& TPI		 No. of Flutes Cham Type* P.D. Limits Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		  Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
3-48 2 Mod H2 47 16719 12 #3 1.969 .312 .551 .141 .110
4-40 2 Mod H2 47 16720 12 #4 2.205 .312 .709 .141 .110
4-40 2 Bot H2 47 16774 12 #4 2.205 .312 .709 .141 .110
4-48 2 Mod H2 47 16721 12 #4 2.205 .312 .709 .141 .110
4-48 2 Bot H2 47 16775 12 #4 2.205 .312 .709 .141 .110
5-40 3 Mod H2 47 16722 12 #5 2.205 .312 .709 .141 .110
5-40 3 Bot H2 47 16776 12 #5 2.205 .312 .709 .141 .110
6-32 3 Mod H2 47 16723 12 #6 2.205 .375 .787 .141 .110
6-32 3 Mod H3 47 16725 12 #6 2.205 .375 .787 .141 .110
6-32 3 Bot H2 47 16777 12 #6 2.205 .375 .787 .141 .110
6-32 3 Bot H3 47 16778 12 #6 2.205 .375 .787 .141 .110
6-40 3 Mod H2 47 16726 12 #6 2.205 .375 .787 .141 .110
6-40 3 Bot H2 47 16779 12 #6 2.205 .375 .787 .141 .110
8-32 3 Mod H2 47 16727 12 #8 2.480 .375 .827 .168 .131
8-32 3 Mod H3 47 16728 12 #8 2.480 .375 .827 .168 .131
8-32 3 Bot H2 47 16780 12 #8 2.480 .375 .827 .168 .131
8-32 3 Bot H3 47 16381 12 #8 2.480 .375 .827 .168 .131
10-24 3 Mod H3 47 16730 12 #10 2.756 .500 .984 .194 .152
10-24 3 Bot H3 47 16782 12 #10 2.756 .500 .984 .194 .152
10-32 3 Mod H2 47 16731 12 #10 2.756 .500 .984 .194 .152
10-32 3 Mod H3 47 16732 12 #10 2.756 .500 .984 .194 .152
10-32 3 Bot H2 47 16783 12 #10 2.756 .500 .984 .194 .152
10-32 3 Bot H3 47 16786 12 #10 2.756 .500 .984 .194 .152
12-24 3 Mod H3 47 16733 12 #12 3.150 .500 1.142 .220 .165
12-28 3 Mod H3 47 16734 12 #12 3.150 .500 1.142 .220 .165
 * Mod = Modified-Bottom (2-4 threads) Go to the top of this page.
  




 


All dimensions are in inches.                 
  Besly Modern Application
 Taps for Stainless Steel
Catl No. 6013DA
Fractional Sizes		    
 
Besly Surface Treatments Besly Drill Selector
Tap Size
& TPI		 No. of Flutes Cham Type* P.D. Limits Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		  Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
1/4-20 3 Mod H3 47 16735 12 1/4 3.150 .625 1.181 .255 .191
1/4-20 3 Mod H5 47 16736 12 1/4 3.150 .625 1.181 .255 .191
1/4-20 3 Bot H3 47 16787 12 1/4 3.150 .625 1.181 .255 .191
1/4-20 3 Bot H5 47 16788 12 1/4 3.150 .625 1.181 .255 .191
1/4-28 3 Mod H3 47 16737 12 1/4 3.150 .625 1.181 .255 .191
1/4-28 3 Mod H4 47 16738 12 1/4 3.150 .625 1.181 .255 .191
1/4-28 3 Bot H3 47 16789 12 1/4 3.150 .625 1.181 .255 .191
1/4-28 3 Bot H4 47 16791 12 1/4 3.150 .625 1.181 .255 .191
5/16-18 3 Mod H3 47 16739 12 5/16 3.543 .688 1.378 .318 .238
5/16-18 3 Mod H5 47 16740 12 5/16 3.543 .688 1.378 .318 .238
5/16-18 3 Bot H3 47 16793 12 5/16 3.543 .688 1.378 .318 .238
5/16-18 3 Bot H5 47 16794 12 5/16 3.543 .688 1.378 .318 .238
5/16-24 3 Mod H3 47 16741 12 5/16 3.543 .688 1.378 .318 .238
5/16-24 3 Mod H4 47 16742 12 5/16 3.543 .688 1.378 .318 .238
5/16-24 3 Bot H3 47 16795 12 5/16 3.543 .688 1.378 .318 .238
5/16-24 3 Bot H4 47 16796 12 5/16 3.543 .688 1.378 .318 .238
3/8-16 3 Mod H3 47 16743 12 3/8 3.937 .750 1.535 .381 .286
3/8-16 3 Mod H5 47 16744 12 3/8 3.937 .750 1.535 .381 .286
3/8-16 3 Bot H3 47 16797 12 3/8 3.937 .750 1.535 .381 .286
3/8-16 3 Bot H5 47 16798 12 3/8 3.937 .750 1.535 .381 .286
3/8-24 3 Mod H3 47 16745 12 3/8 3.937 .750 1.535 .381 .286
3/8-24 3 Mod H4 47 16746 12 3/8 3.937 .750 1.535 .381 .286
3/8-24 3 Bot H3 47 16799 12 3/8 3.937 .750 1.535 .381 .286
3/8-24 3 Bot H4 47 16801 12 3/8 3.937 .750 1.535 .381 .286
  * Mod = Modified-Bottom (2-4 threads) Go to the top of this page.
Tap Size
& TPI		 No. of Flutes Cham Type* P.D. Limits Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		  Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
7/16-14 3 Mod H3 47 16747 12 7/16 3.937 .875 - .323 .242
7/16-14 3 Mod H5 47 16748 12 7/16 3.937 .875 - .323 .242
7/16-14 3 Bot H3 47 16803 12 7/16 3.937 .875 - .323 .242
7/16-14 3 Bot H5 47 16804 12 7/16 3.937 .875 - .323 .242
7/16-20 3 Mod H3 47 16749 12 7/16 3.937 .875 - .323 .242
7/16-20 3 Mod H5 47 16750 12 7/16 3.937 .875 - .323 .242
7/16-20 3 Bot H3 47 16806 12 7/16 3.937 .875 - .323 .242
7/16-20 3 Bot H5 47 16807 12 7/16 3.937 .875 - .323 .242
1/2-13 3 Mod H3 47 16751 12 1/2 4.331 .938 - .367 .275
1/2-13 3 Mod H5 47 16752 12 1/2 4.331 .938 - .367 .275
1/2-13 3 Bot H3 47 16808 12 1/2 4.331 .938 - .367 .275
1/2-13 3 Bot H5 47 16809 12 1/2 4.331 .938 - .367 .275
1/2-20 3 Mod H3 47 16753 12 1/2 4.331 .938 - .367 .275
1/2-20 3 Mod H5 47 16754 12 1/2 4.331 .938 - .367 .275
1/2-20 3 Bot H3 47 16812 12 1/2 4.331 .938 - .367 .275
1/2-20 3 Bot H4 47 16813 12 1/2 4.331 .938 - .367 .275
9/16-12 3 Mod H3 47 16755 3 9/16 4.331 1.000 - .429 .322
9/16-12 3 Mod H5 47 16756 3 9/16 4.331 1.000 - .429 .322
9/16-12 3 Bot H3 47 16814 3 9/16 4.331 1.000 - .429 .322
9/16-12 3 Bot H5 47 16815 3 9/16 4.331 1.000 - .429 .322
9/16-18 3 Mod H3 47 16757 3 9/16 4.331 1.000 - .429 .322
9/16-18 3 Mod H5 47 16758 3 9/16 4.331 1.000 - .429 .322
9/16-18 3 Bot H3 47 16816 3 9/16 4.331 1.000 - .429 .322
9/16-18 3 Bot H5 47 16817 3 9/16 4.331 1.000 - .429 .322
  * Mod = Modified-Bottom (2-4 threads) Go to the top of this page.
Tap Size
& TPI		 No. of Flutes Cham Type* P.D. Limits Surface Treat EDP No Pkg Qty Nominal Size
0d1		 Overall Length
I1		 Thread Length
I2		  Thread
+ Neck
I3		 Shank Dia.
0d2		 Square Size
q
5/8-11 3 Mod H3 47 16759 3 5/8 4.331 1.094 - .480 .360
5/8-11 3 Mod H5 47 16760 3 5/8 4.331 1.094 - .480 .360
5/8-11 3 Bot H3 47 16818 3 5/8 4.331 1.094 - .480 .360
5/8-11 3 Bot H5 47 16819 3 5/8 4.331 1.094 - .480 .360
5/8-18 3 Mod H3 47 16761 3 5/8 4.331 1.094 - .480 .360
5/8-18 3 Mod H5 47 16762 3 5/8 4.331 1.094 - .480 .360
5/8-18 3 Bot H3 47 16820 3 5/8 4.331 1.094 - .480 .360
5/8-18 3 Bot H5 47 16821 3 5/8 4.331 1.094 - .480 .360
3/4-10 4 Mod H3 47 15484 3 3/4 4.921 1.219 - .590 .442
3/4-10 4 Mod H5 47 16763 3 3/4 4.921 1.219 - .590 .442
3/4-10 4 Bot H3 47 15485 3 3/4 4.921 1.219 - .590 .442
3/4-10 4 Bot H5 47 16822 3 3/4 4.921 1.219 - .590 .442
3/4-16 4 Mod H3 47 16764 3 3/4 4.921 1.219 - .590 .442
3/4-16 4 Mod H5 47 16765 3 3/4 4.921 1.219 - .590 .442
3/4-16 4 Bot H3 47 16823 3 3/4 4.921 1.219 - .590 .442
3/4-16 4 Bot H5 47 16824 3 3/4 4.921 1.219 - .590 .442
7/8-9 4 Mod H4 47 16766 3 7/8 5.512 1.344 - .697 .523
7/8-9 4 Mod H6 47 16767 3 7/8 5.512 1.344 - .697 .523
7/8-14 4 Mod H4 47 16768 3 7/8 5.512 1.344 - .697 .523
7/8-14 4 Mod H6 47 16769 3 7/8 5.512 1.344 - .697 .523
1-8 4 Mod H4 47 16770 3 1 6.299 1.500 - .800 .600
1-8 4 Mod H6 47 16771 3 1 6.299 1.500 - .800 .600
1-12 4 Mod H4 47 16772 3 1 6.299 1.500 - .800 .600
1-12 4 Mod H6 47 16773 3 1 6.299 1.500 - .800 .600
 * Mod = Modified-Bottom (2-4 threads) Go to the top of this page.

Made in USA
Sales Office Small Logo 16200 Woodmint Lane Small Logo South Beloit, IL 61080 Small Logo (815) 389-2231 Small Logo fax (815) 389-1339 Small Logo sales@besly.com
Taps | Dies | Drills | End Mills | Reamers | Misc | Distributor | About Us | Site Map | Home
Copyright 2000-2010 by Besly Cutting Tools, Inc. All Rights Reserved.
Comments? webmaster@besly.com