|
|
|
|||||||
|
|
||||||||
| Taps | Dies | Drills | End Mills | Reamers | Misc | Support | About Us | Site Map |
|
Besly Standard Straight Flute Taper Pipe Taps High Speed Steel NPTF-Dryseal |
Catalog Number: 3167
Please call 800 435-2965 for current net pricing. Note: Click the EDP No to check availability. |
 All dimensions are in inches. |
||||
|
Besly Standard Straight Flute Taper PipeTaps Catl No. 3167 Fractional Sizes |
||||
 |
 |
|||
|
Tap Size |
Thrds Per Inch | No. of Flutes | Cham Type | Surface Treat | EDP No | Pkg Qty | Gage Projection |
Overall Length A |
Thread Length B |
Shank Dia. C |
Square Length D |
Square Size E |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min. | Max. | ||||||||||||
| 1/8 | 27 | 4 | Plug | 14022 | 12 | .250 | .374 | 2-1/8 | 3/4 | .3125 | 3/8 | .234 | |
| 1/8 | 27 | 4 | Plug | 33 | 15312 | 12 | .250 | .374 | 2-1/8 | 3/4 | .3125 | 3/8 | .234 |
| 1/8 | 27 | 4 | Plug | 14004 | 12 | .250 | .374 | 2-1/8 | 3/4 | .4375 | 3/8 | .328 | |
| 1/8 | 27 | 4 | Plug | 33 | 15306 | 12 | .250 | .374 | 2-1/8 | 3/4 | .4375 | 3/8 | .328 |
| 1/4 | 18 | 4 | Plug | 14041 | 12 | .398 | .522 | 2-7/16 | 1-1/16 | .5625 | 7/16 | .421 | |
| 1/4 | 18 | 4 | Plug | 33 | 15318 | 12 | .398 | .522 | 2-7/16 | 1-1/16 | .5625 | 7/16 | .421 |
| 1/4 | 18 | 4 | Plug | 52 | 15319 | 12 | .398 | .522 | 2-7/16 | 1-1/16 | .5625 | 7/16 | .421 |
| 3/8 | 18 | 4 | Plug | 14060 | 3 | .392 | .516 | 2-9/16 | 1-1/16 | .7000 | 1/2 | .531 | |
| 3/8 | 18 | 4 | Plug | 33 | 15324 | 3 | .392 | .516 | 2-9/16 | 1-1/16 | .7000 | 1/2 | .531 |
| 1/2 | 14 | 4 | Plug | 14075 | 3 | .518 | .642 | 3-1/8 | 1-3/8 | .6875 | 5/8 | .515 | |
| 1/2 | 14 | 4 | Plug | 33 | 15329 | 3 | .518 | .642 | 3-1/8 | 1-3/8 | .6875 | 5/8 | .515 |
| 3/4 | 14 | 5 | Plug | 14094 | 3 | .504 | .628 | 3-1/4 | 1-3/8 | .9063 | 11/16 | .679 | |
| 1 | 1-1/2 | 5 | Plug | 14112 | 1 | .584 | .772 | 3-3/4 | 1-3/4 | 1.1250 | 13/16 | .843 | |
| 1-1/4 | 11-1/2 | 5 | Plug | 14130 | 1 | .592 | .780 | 4 | 1-3/4 | 1.3125 | 15/16 | .984 | |
| 1-1/2 | 11-1/2 | 7 | Plug | 14142 | 1 | .605 | .793 | 4-1/4 | 1-3/4 | 1.5000 | 1 | 1.125 | |
| 2 | 11-1/2 | 7 | Plug | 14154 | 1 | .573 | .761 | 4-1/2 | 1-3/4 | 1.8750 | 1-1/8 | 1.406 | |
 |
These
NPTF-Dryseal Taper Pipe Taps are made with interrupted
threads for use in soft or stringy metals. The removal of every other
tooth helps to break the chip and permits a larger supply of lubrication
to reach the cutting teeth, thus helping to eliminate torn threads.
16200 Woodmint Lane